Supply & Installation of field instruments such as

1. Supply and installation of the following:

   1. Presure Transmitter
   2. Temperature Transmitter and Sensor
   3. Flow Transmitter
   4. Controllers
   5. Control Valves
   6. Pressure Switches
   7. Pressure Guages
   8. Temperature Gauges
   9. Other Field Instruments and Contorls
   10. Programmable logic Controler (PLC)
   11. Supervision Control and Data Acquisition
2. Design and Engineering
3. Commissioning Works
1. Pump and motor setting, valves and piping installation with supports as per design specification
2. Repair overhaul circulating water pumps, boiler feed pumps, sump pumps, etc

Provide Tools, Equipment and Skilled Personnel and Supervision for:

1. Regular, major and emergency repair / maintainance work for power plant equipment
2. Alignment and on-site balancing of rotating equipment

Supply, Fabrication, Repair and installation of Parts of:

1. Boiler and Auxiliaries
1. Bending of boiler tubes as per sample for replacement of defective superheater, reheater, peepholes, sootblower manipulated tubes, Tubes to be supplied by owner
2. Supply/Fabrication of erosion shields clips and supports for boiler panels
3. Cut and replace defective boiler tubes
4. Inspection of boiler steam drums internals and conductor of welding joints and parts.
5. Repair or replace burner parts and sootblowers
2. Fans and Air Ducts
1. Overhauling and repair of forced draft, primary and induced draft fans
2. Thickness gauging of duct plates and replaced damaged/thin plates
3. Pumps and Piping Installation
1. Pump and motor setting, valves and piping installation with supports as per design specification
2. Repair overhaul circulating water pumps, boiler feed pumps, sump pumps, etc
4. Turbines and Auxiliaries
1. Cleaning of condenser tubes using high pressure washers
2. Inspection and overhaul of main turbine bearings, valves and other major parts
3. Re-tubing of heat exchangers
4. Repair of travelling screens
5. Valves and Supports
1. Valves inspection and replacement using cold cutting/behaving machines
2. Install/replace damage pipe support
3. Overhauling of valves
6. Instrument System Design and Development HMI/GUI and related PLC Program based on clients requirements
7. In-Place Pipe Cold Cutting & Heavy Wall Welding